Spun-cast pipes of heat-resistant and corrosion-proof steels and alloys (45Х25Н20С, 50Х25Н35С2Б, 50Х25Н35В5К15С, 45Х28Н49В5С, 10Х20Н32ТЮ, etc.) according to Spec 1333-047-00220302-02, intended for manufacturing of coils for tube furnaces, and ammonia, hydrogen, and carbon disulfide production plants operating in the temperature range of 760-10600C and under pressures of up to 3.92 MPA (40 kgf/cm2). The pipe diameters are 85 to 320 mm, and pipe length, up to 12,000 mm.

Shaped castings made of heat resistant and corrosion resistant steels and alloys are used in tube furnace serpentines, ammonia, hydrogen, ethylene, carbon bisulphide plants with 760 -1060 Сo operating temperature and pressure up to 3.92 МPa (40 kgf/cm2) in accordance with TU 4112-077-00220302-2003, carbon and alloyed steel and iron castings in accordance with company standard STP 4.2.3.-10.8-01-2003.

Products for petroleum industry: tubes which are welded into strands up to 15,000 mm long, serpentines tubes etc. Products are inspected with dye penetrant and X-rays and tested with 200 kgf/cm2 pressure.

OAO Cherepovets Casting & Mechanical Plant has long relations with Russian leading industries.
The plant produces items for petroleum industry which are inspected with dye penetrant and X-rays and tested with 200 kgf/cm2 pressure.

Double tube suspension is used in tube furnaces as fastening fitting for cooling and convection serpentines.

Spare parts of iron-and-nickel based corrosion-resistant steels and alloys for chemical pumps of АХ type (Versions К, Е, И. and А) and Х type (Versions Д and Л): pump bodies, seal bodies, protective disks, suction covers, impellers (open and closed), bearing housings, flanges, and guide devices.

Rigging for thermochemical treatment shaft furnaces of США, СШЦМ, Ц-105, Ц-75, and Ц-60 type, such as retorts, crucibles, muffles, basket rings, basket bottoms, diffusers, etching troughs, pillars, crossbars, grates, and endogenerator rings of heat-resistant steels and alloys: 40X24H12d, 20X25H19C2Л, and ХН45Ю.

Spare parts of dipping equipment of hot galvanizing lines: drums, levers, and barrels made of AISI 316L low-carbon steel resistant to corrosive environments.

Rollers for collecting roller tables (their barrels are made of ЧЮХШ high-strength heat-resistant cast iron) to transfer the rolled product from the chiller to the shears and to the finished goods warehouse).

Rollers for machines for continuous casting of horizontal, radial, and curved type (roller barrels are made of 38X2H2MA and 20X17H2 steels).

Rollers for thermal and heating furnaces with a roller floor, used for heating and thermal treatment of metal plates, rails, pipes, and other blanks (roller barrels are made of heat-resistant steels and alloys: 20X25H19C2Л, 20X23H18, or Х28Н448В5Л).